Data Sheet
Table Of Contents
- 1 Advisories
- 2 Introduction
- 3 Safety
- 4 Descriptions
- 5 User Interface Menus
- 6 Powering the MR277
- 7 Moisture Measurement Operation
- 8 Thermal and Visible Camera Operation
- 9 Ambient Temperature and Humidity Measurements
- 10 Capturing and Working with Screen Captures
- 11 Bluetooth® Communication and FLIR Tools™
- 12 Field Firmware Updates
- 13 Maintenance
- 14 Specifications
- 15 Appendices
- 16 Limited 10–Year Warranty
- 17 Customer Support
Thermal and Visible Camera Operation
8
Figure 8.1 Color Palette options
On the right side of the thermal images, a vertical bar graph provides a tem-
perature scale for convenience. The top of the scale shows the hotter pixels in
the frame, and the lower part of the scale shows the colder pixels. Digital
readouts appear on the top and bottom of the bar graph to show the high and
low range limits for the camera image. See Figure 8.1.
When the Laser pointer button
is pressed, the Laser beam appears. Use
the Laser beam and display cross-hairs to target the surfaces under test.
Note that the Laser is carefully aimed to align with the cross-hairs for easier
identification and targeting of objects and surfaces.
#NAS100005; r. AG/62027/62027; en-US
37