Data Sheet
Table Of Contents
- 1 Advisories
- 2 Introduction
- 3 Safety
- 4 Descriptions
- 5 User Interface Menus
- 6 Powering the MR277
- 7 Moisture Measurement Operation
- 8 Thermal and Visible Camera Operation
- 9 Ambient Temperature and Humidity Measurements
- 10 Capturing and Working with Screen Captures
- 11 Bluetooth® Communication and FLIR Tools™
- 12 Field Firmware Updates
- 13 Maintenance
- 14 Specifications
- 15 Appendices
- 16 Limited 10–Year Warranty
- 17 Customer Support
Thermal and Visible Camera Operation
8
3. Use the navigation arrows and Select button
to set the Alarm (ABOVE,
BELOW, or OFF) and to set the temperature limit. There is no beeper
available for the Radiometry alarms so the ‘No Sound’ setting cannot be
changed. Press Select to confirm and press Return
to exit the menu.
4. When the High or the Low Alarm is enabled, the main display will show
the alarm bell icon next to the measurement digits as shown in Figure 8–4
below.
5. When the measurement exceeds the high threshold (i.e., when ABOVE
setting is chosen), the text for the measurement reading will appear red in
color. When the measurement falls below the low threshold (when BE-
LOW setting is chosen), the text for the measurement reading will appear
blue in color.
Figure 8.4 High Radiometry alarm example. Note that the reading is red in color
#NAS100005; r. AG/62027/62027; en-US
40