Instruction Manual

Appendix A — Camera Conditions (Select models only)
10
To configure focus settings:
1. Click Focus to enter the focus setting submenu.
2. Under Focus Mode, select one of the following options:
• Auto: The camera automatically adjusts the focus after it performs a Pan-Tilt-Zoom
function (recommended).
• Manual: The camera must be manually put into focus using the NVR menu.
• Semi Auto: The camera automatically adjusts the focus after Zoom functions only.
3. Under Focus Limit, select the focus limit for the camera. Set the focus limit between
10CM and 5M to only perform auto-focus on objects further out than the focus limit (for
example, a focus limit of 1M means that the camera will focus on objects further than a
metre away), or select Auto to auto-focus on all objects regardless of their distance
from the camera.
4. Under Sensitivity, select how sensitive you want the automatic focus to be. The lower
the sensitivity, the more difficult it is for objects in the scene to activate automatic focus.
5. Under IR Correction, select Auto to have the image sensor automatically determine
when to use IR correction (recommended), Enable use IR correction at all times, or
Disable to disable IR correction. IR correction is especially effective in night-time
conditions.
10.7 Zoom Setting
Configure digital and optical zoom settings.
To configure zoom settings:
1. Click Zoom to enter the zoom setting submenu.
2. Check Digital Zoom to enable digital zoom on the camera.
#LX400038; r. 1.0/18537/18537; en-US
132