Instruction Manual
Table Of Contents
- 1 Overview
- 2 Web Configuration Setup
- 3 Live View
- 4 Playback (Cameras with microSD only)
- 5 Setup
- 6 Firmware Upgrade Tool
- 7 Connecting to Cameras with FLIR Cloud™ CMS
- 8 Using FLIR Cloud™ Client for PC or Mac
- 9 Smartphone and Tablet Apps
- 9.1 iPhone
- 9.1.1 Prerequisites
- 9.1.2 Connecting to your IP camera on an iPhone
- 9.1.3 Live View Interface
- 9.1.4 Controlling PTZ Cameras
- 9.1.5 Viewing Snapshots and Videos with Local Files
- 9.1.6 Using Playback Mode on iPhone
- 9.1.7 Enabling Push Notifications
- 9.1.8 Using the Event List
- 9.1.9 Using Favorites
- 9.1.10 Using the E-Map
- 9.1.11 Device Manager
- 9.2 iPad
- 9.2.1 Prerequisites
- 9.2.2 Connecting to your IP Camera on an iPad
- 9.2.3 Live View Interface
- 9.2.4 Controlling PTZ Cameras
- 9.2.5 Using Playback Mode on iPad
- 9.2.6 Using Local File to View Manual Recordings
- 9.2.7 Enabling Push Notifications
- 9.2.8 Using the Event List
- 9.2.9 Using Favorites
- 9.2.10 Using the E-Map
- 9.2.11 Using the Device Manager
- 9.3 Android
- 9.3.1 Prerequisites
- 9.3.2 Connecting to your IP camera on Android
- 9.3.3 Live View Interface
- 9.3.4 Controlling PTZ Cameras
- 9.3.5 Viewing Snapshots and Videos with Local Files
- 9.3.6 Using Playback Mode on iPhone
- 9.3.7 Enabling Push Notifications
- 9.3.8 Using the Event List
- 9.3.9 Using Favorites
- 9.3.10 Using the E-Map
- 9.3.11 Device Manager
- 9.1 iPhone
- 10 Appendix A — Camera Conditions (Select models only)
Appendix A — Camera Conditions (Select models only)
10
To configure day / night settings:
1. Click Day / Night to enter the day / night submenu..
2. Under Type, select how the camera switches between day and night modes:
• Electron: Day / night switch-over is determined by camera software. This is recom-
mended if the camera switches its viewing mode at around the same time every day
(for example, sunset or sunrise in an outdoor location).
• Mechanism: Day / night switch-over is determined by a light filter. This is recom-
mended if the camera is in a location with fluctuating light conditions (for example,
indoors with lights turning on and off throughout the day).
3. Under Day & Night, select one of the following options:
• Auto: The camera switches between day and night mode automatically with chang-
ing light conditions (recommended).
• Color: The camera remains in full color. This setting is not recommended unless
the camera is in an area with constant lighting.
• B&W: The camera remains in black & white. This setting is not recommended un-
less the camera is in a constantly dark environment.
4. Under Sensitivity, click + / - or use the slider to set the sensitivity for day / night
switch-over. Setting a lower value means that the camera’s day / night switch-over will
happen in brighter conditions, while a higher value means the switch-over will happen
in darker conditions.
Note
Day & Night must be set to Auto to configure this menu item.
10.6 Focus Setting
Configure how the camera focuses on objects in the image.
#LX400038; r. 1.0/18537/18537; en-US
131