Operation Manual

TM
USER GUIDE 2
FLIR ONE QUICK START
STEP 1
Charge the FLIR ONE
TM
with the included USB power cable connected
to a 1A power source. The Charge Indicator LED next to the USB
connection blinks on and off while the FLIR ONE is charging and
stays on continuously when it is fully charged. Once the FLIR ONE
is charged, attached it to the phone.
Note (iOS) model: The power cable for the iPhone (with a Lightning connector)
will not work with the FLIR ONE
. Ensure the FLIR ONE is fully charged before
using it the rst time. A charging cycle takes approximately one hour.
STEP 2
Download and install the FLIR ONE app, which is available on the
Apple App Store
℠
. When you start the FLIR ONE app, a short tutorial
will be displayed to help you get started with the FLIR ONE.
STEP 3
Press the power button on the side of the FLIR ONE to turn it on.
Initially, the indicator light will turn orange, and then it will ash
green when the device is ready.