Operation Manual

TM
USER GUIDE 6
TIME-LAPSE VIDEO
At the top of the bottom bar, swipe right or left to select Time-Lapse
mode. Then tap on the red button to display the Time-Lapse options.
Adjust the options as needed, and then tap the red button to begin
video capture. Tap on the red button again to stop the video capture.
FLIR LIBRARY
Captured images and video may be viewed and edited by selecting
the thumbnail image in the lower left corner of the screen. Images
and videos may be shared through text messaging or email and
may be edited by changing the color palette or the temperature
scale. While an image is being viewed, it is possible to swipe up or
down to reveal the visible image that is used for MSX blending.
CHANGING COLOR PALETTES
On the display (the live image), tap the color palette icon in the
lower right to change how the image is displayed. Select one of the
displayed color palettes. The color palettes are described in more
detail in the Help and Support feature of the app (see Settings
Menu). The app allows a choice from nine dierent palettes. Some
include color, grayscale, or a combination of both.
SPOT METER
When the Spot Meter is enabled (indicated by the center of the icon
lled in with white), the FLIR ONE will display a temperature estimate
(in degrees C or F) on the image. The accuracy of the Spot Meter
depends on a great many factors, including the distance from the
object, the ambient temperature, and the emissivity of the material
being observed. Users are encouraged to learn more about the
science of Thermography from www.infraredtraining.com. To
switch between Fahrenheit to Celsius, use the Settings option in the
Control Panel, described in the next page.
Note: When the Spot Meter is enabled and the Automatic Calibration is
disabled, the Calibration icon in the upper right will turn red. Tap the icon to
cause the camera to do a manual calibration.
PALETTE SCREEN
FLIR LIBRARY SCREENFLIR LIBRARY SCREEN
Edit Image
Image InfoShare Image Delete Image