User Guide

427-0075-01-12 Revision 140 October 2019 11

This document does not contain any export-controlled information.

PT-Series HD Camera Installation

Step 5 Ensure the camera is properly grounded. FLIR requires using a 14 AWG to 16 AWG

grounding strap anchored to the ground lug on the back plate of the camera housing and

then terminated to the nearest earth-grounding point.

M8 or 5/16” fasteners (not supplied)

4 places, minimum length 1 in.

M8 split lock washer (4 places)

M8 flat washer (4 places)

Figure 1-3: PT-Series HD Galvanic Isolation Kit (PN 4204960)

M8 nylon shoulder washer or

isolation plate

example mounting structure

(dependent on mounting structure)

nylon flat washer (4 places)

(FLIR PN 500-0461-00)

If using nylon flat washers,

apply a generous coat of Tef-Gel

If using nylon flat washers,

apply a generous coat of Tef-Gel

filling all gaps and voids.

(4 places)