User Guide

427-0075-01-12 Revision 140 October 2019 46
This document does not contain any export-controlled information.
Basic Operation and Configuration
ONVIF Interface
The ONVIF (Open Network Video Interface Forum) is an open industry forum for the development of
a global standard for the interface of network video products. An ONVIF-compliant VMS can be used
to control a FLIR camera. Refer to the VMS documentation to determine what parameters are
needed. By default, the camera is configured with a VMS Remote interface with ONVIF 2.0
parameters (Profile S). After the interface is configured, scroll down and click on the Save button to
save the configuration. The changes will not take effect until the server is stopped and started.
Several types of third-party Video Management Systems (VMS) are supported by FLIR IP cameras.
Because these systems tend to evolve and change over time, contact the local FLIR representative
or FLIR Technical Support to resolve any difficulties or questions about using this feature.
Sensor > Devices > IR > Zoom Slave
The Zoom Slave function is set from the IR web page. To slave the IR camera to the DLTV zoom
select the IR web page and scroll down to Zoom Slave.
When the IR camera zoom is slaved to the DLTV camera (Specific Camera), the cameras will only
zoom when the DLTV camera is the active camera.
Scroll down
to Save
Select zoom mode
Set to Yes
Select camera
controlling zoom