Operation Manual

Handling the camera13

Follow this procedure:

1. Before attaching the close-up lens, adjust the focus to infinity by doing the following:

1.1. Aim the camera toward a distant object (more than 40 m (130′) away).

1.2. Autofocus the camera (see section 13.7 Autofocusing the infrared camera,

page 34) or adjust the focus manually (see section 13.6 Adjusting the infrared

camera focus manually, page 33).

Note Once the focus is set to infinity, be careful when you continue with the proce-

dure. Make sure you do not rotate the focusing ring by mistake.

2. Remove the outermost rubber protection from the infrared lens.

3. Align the close-up lens with the infrared lens. Carefully push the close-up lens into

position.

4. Turn the close-up lens clockwise until it stops.

#T559954; r. AL/37426/37426; en-US