Operation Manual

Saving and working with images
14
4. Do one or more of the following:
• To switch between an infrared image and a visual image, move the joystick up/down.
• To view the previous/next image, move the joystick left/right.
• To edit the image, add annotations, display information, or delete the image, push
the joystick. This displays a context menu.
• To return to the image archive overview, push the Back button
.
14.5 Editing a saved image
14.5.1 General
You can edit a saved image. You can also edit an image in preview mode.
14.5.2 Procedure
Follow this procedure:
1. Open the image in the image archive.
2. Push the joystick and select
(Edit) from the menu.
3. Manual image adjustment mode is now active, and the status icon
is displayed.
For image adjustment instructions, see section 15.3 Adjusting the infrared image, page
53.
4. Push the joystick. This displays a context menu.
• Select
(Cancel) to exit edit mode.
• Select
(Measurement parameters) to change the global parameters.
• Select
(Image mode) to change the image mode.
• Select
(Measurement) to add a measurement tool.
• Select
(Color) to change the color palette or set a color alarm.
• Select
(Save) to save and exit edit mode.
14.5.3 Related topics
• 17.5 Changing object parameters, page 64.
• 16 Working with image modes, page 60.
• 17 Working with measurement tools, page 62.
• 15.5 Changing the color palette, page 56.
• 18 Working with color alarms and isotherms, page 71.
14.6 Creating a PDF report in the camera
14.6.1 General
You can create a PDF report and save it to the memory card. You can then transfer the
PDF report to a computer, iPhone, or iPad using FLIR Tools/Tools+, and send the report to
a customer.
#T559954; r. AL/37426/37426; en-US
49