Operation Manual

About FLIR Tools/Tools+

7.2 Workflow

7.2.1 General

When you carry out an infrared inspection you follow a typical workflow. This section gives

an example of an infrared inspection workflow.

7.2.2 Figure

7.2.3 Explanation

1. Use your camera to take your infrared images and/or digital photos.

2. Connect your camera to a PC using a USB connector.

3. Import the images from the camera into FLIR Tools/Tools+.

4. Do one of the following:

• Create a PDF imagesheet in FLIR Tools.

• Create a PDF report in FLIR Tools.

• Create a non-radiometric Microsoft Word report in FLIR Tools+.

• Create a radiometric Microsoft Word report in FLIR Tools+.

5. Send the report to your client as an attachment to an e-mail.

#T559954; r. AL/37426/37426; en-US