Operation Manual

Achieving a good image15

Select the type of manual image adjustment mode under (Settings) > Device settings

> User interface options > Manual adjustment mode.

When manual image adjustment mode is active, the status icon

is displayed.

• In live mode, push the button

to switch between automatic and manual image adjust-

ment modes. You can also switch between the modes by touching the temperature

scale on the screen.

• In preview/edit mode, manual image adjustment mode is active.

Note You can also assign the function Auto adjust the manual temperature scale to one

of the programmable buttons, which allows you to perform an automatic adjustment of the

image while remaining in manual image adjustment mode. Select

(Settings) > Pro-

grammable buttons.

15.3.2 Example 1

Here are two infrared images of a building. In the left image, which is auto-adjusted, the

large temperature span between the clear sky and the heated building makes a correct

analysis difficult. You can analyze the building in more detail if you change the temperature

scale to values close to the temperature of the building.

Automatic Manual

15.3.3 Example 2

Here are two infrared images of an isolator in a power line. To make it easier to analyze

the temperature variations in the isolator, the temperature in the right image has been

changed to values close to the temperature of the isolator.

Automatic Manual

#T559954; r. AL/37426/37426; en-US