Operation Manual

Configuring Wi-Fi

24.1 General

Depending on your camera configuration, you can connect the camera to a wireless local

area network (WLAN) using Wi-Fi, or let the camera provide Wi-Fi access to other devices.

You can connect the camera in two different ways:

• Most common use: Setting up the camera as a wireless access point. This method is

primarily used with other devices, e.g., an iPhone or iPad.

• Less common use: Connecting the camera to a wireless local area network (WLAN).

24.2 Setting up a wireless access point (most common use)

Follow this procedure:

1. Push the joystick to display the menu system.

2. Use the joystick to go to

(Settings).

3. Push the joystick to display the Settings menu.

4. Select Device settings and push the joystick.

5. Depending on the camera configuration, select Wireless & geolocation, Wireless, or

Geolocation and push the joystick.

6. Select Wi-Fi and push the joystick.

7. Select Share and push the joystick.

8. (Optional step.) To display and change the parameters, select Share settings and push

the joystick.

• To change the SSID, select Network name (SSID) and push the joystick.

• To change the WPA2 password, select Password and push the joystick.

Note These parameters are set for your camera’s network. They will be used by the

external device to connect that device to the network.

24.3 Connecting the camera to a WLAN (less common use)

Follow this procedure:

1. Push the joystick to display the menu system.

2. Use the joystick to go to

(Settings).

3. Push the joystick to display the Settings menu.

4. Select Device settings and push the joystick.

5. Depending on the camera configuration, select Wireless & geolocation, Wireless, or

Geolocation and push the joystick.

6. Select Wi-Fi and push the joystick.

7. Select Connect to network and push the joystick.

8. To display a list of the available networks, select Networks and push the joystick.

9. Select one of the available networks.

Password-protected networks are indicated with a padlock icon, and for these you will

need to enter a password the first time you connect to the network. After that the cam-

era will connect automatically to the network. To disable the automatic connection, se-

lect Forget network.

Note Some networks do not broadcast their existence. They appear in the list as Unti-

tled. To connect to such a network, you will be prompted to enter additional parameters.

#T559954; r. AL/37426/37426; en-US