T43 Series Quick Networking Guide

Record Your IP and MAC Address
Local Connection
MAC Address: The camera’s MAC address is printed on the product label located on
the camera housing.
IP Address: To find the camera’s IP address, see Step 2.
This guide will show you how to set up your FLIR thermal camera for connection over the Internet
using a PC, Mac, smartphone, or tablet.
1
2
3
b
c
e
Manually forward ports 80 and 35000 to the camera’s IP address.
All routers are different. To port forward your router, please refer to your router’s user manual.
An example of a port forwarding screen is shown for illustration purposes:
EXAMPLE
80 80HTTP 12
35000 12Client 35000
Before You Start:
Make sure you have:
• A router and high-speed Internet access (not included).
• Connected the camera to a router or switch on your network using an Ethernet cable. See the Quick
Connection Guide for details.
• A PC or Mac connected to the same network as your camera.
a
FLIR Thermal Series
Quick Networking Guide
Record your information below:
MAC ADDRESS: - - - - -
IP ADDRESS: . . .
Enter the client user name (default: admin) and
password (default: admin) and click Login.
Check your
camera
Click Add
f
Click Add ( ) then Live View ( ).
g
Click and drag
Default Group
to the display
window to open
your cameras in
live view.
Install FLIR Cloud™ Client from
www.flir.com/security/support on a
PC or Mac in the same LAN as the camera.
Port Forwarding
Register for FLIR DDNS
4
c
Complete the Account Information fields with
your personal information.
a
Open your web browser and go to:
http://ddns.myddns-flir.com
d
Record your
information here:
e
b
Click Create Account.
DDNS User Name:
DDNS Domain Name:
DDNS Password:
Complete the System Information fields:
Product License:
Select your product
model from the
Product License
drop down menu.
Once the information has been entered,
click Create New Account. Your Account
information will be sent to you at the email
Address you used in Step c.
<Product Code>-
<MAC Address>:
Enter the MAC address
of the camera. The MAC
address is printed on
a label on the camera
housing.
URL Request:
Choose a URL for your
DDNS connection
(i.e. your name, your
company or business
name, or anything of
your choice).
f
a
b
d
NOTE: If you are using the camera with an NVR or DVR, you should use the
instructions included with the NVR or DVR to set up a remote connection.
NOTE: If you are configuring multiple cameras, you must change the ports used by each cam-
era. Two cameras cannot use the same port number. For information on changing camera ports,
see the instruction manual.
Click Add ( ) and then click Devices ( ).
The client scans your LAN for connected
cameras. Write down the IP address of your
camera.
Enter the password (default: admin) for your
camera and click OK.
Result:
FLIR_THERMAL_SERIES_QNG_EN.indd 1 1/6/2015 3:45:55 PM