Datasheet

FLIR TG165/TG167

Spot thermal camera

The FLIR TG165 / TG167 Spot Thermal Camera bridge the gap between single

spot infrared thermometers and FLIR’s thermal cameras. Equipped with

FLIR’s exclusive Lepton

micro thermal sensor, the TG165 / TG167 let you see

the heat so you know where to reliably measure it.

The TG165 is useful for building applications, like HVAC inspections, or

locating a warm pipe in a wall. The wider ﬁeld of view (50° horizontal) makes

it easy to frame an entire wall in a single image.

The TG167 is primarily designed for indoor electrical inspections; if you are

an electrician looking for hotspots in electrical cabinets or switch boxes, the

TG167 will produce higher quality images because the camera is optimized for

targets in a narrow ﬁeld of view (25° horizontal).

Both versions allow you to store images and download data so that you can

document your ﬁndings in a report.

See the Heat°™ - Speed Troubleshooting

FLIR’s Innovative Lepton

IR Imaging Engine

• Instantly shows what’s hot and where to aim

• Eliminates blind guesswork

• 24:1 spot size ratio for safer distance measuring

Grab and Go Simplicity

Fire It Up and Get to Work in Seconds

• Intuitive to operate with no special training required

• Easily save images and data for documentation

• Download images fast over USB or from removable micro SD

Rugged and Reliable

Designed for the Harshest Environments

• Built to withstand a 2 meter drop

• Covered by FLIR’s exclusive 2-10 warranty

• Compact and durable to easily stow in a crowded tool bag

Mechanical Overheating

Electrical Troubleshooting Warm Pipe in Wall

Refrigeration Issues

www.ﬂir.com/test

PAGE 1
FLIR TG165/TG167 Spot thermal camera The FLIR TG165 / TG167 Spot Thermal Camera bridge the gap between single spot infrared thermometers and FLIR’s thermal cameras. Equipped with FLIR’s exclusive Lepton® micro thermal sensor, the TG165 / TG167 let you see the heat so you know where to reliably measure it. The TG165 is useful for building applications, like HVAC inspections, or locating a warm pipe in a wall. The wider field of view (50° horizontal) makes it easy to frame an entire wall in a single image.
PAGE 2
SPECIFICATIONS Field of view (FoV) comparison Model TG165 TG167 Imaging and optical data IR resolution TG167 80 × 60 pixels Thermal sensitivity/NETD < 150 mK Field of view (FOV) 50º x 38,6º 25º x 19.6º Minimum focus distance 0.1 m (4 in.) Image frequency 9Hz Focus Focus free Detector data Detector type Focal plane array (FPA), uncooled microbolometer Spectral range 8–14 μm TG165 Image presentation Display 2.0 in.