Specification Sheet

The FLIR TG167 Spot Thermal Camera bridges the gap between

single spot infrared thermometers and FLIR’s legendary thermal

cameras. Equipped with FLIR’s exclusive Lepton® micro thermal

sensor, the TG167 lets you see the heat so you know where to

reliably measure it. Designed for indoor electrical inspection, the

TG167 will help you easily ﬁnd unseen hot and cold spots in electrical

cabinets or switch boxes, giving you quality image detail on even

small connectors and wires. Then you can store images and download

data to show customers and include in reports.

See the Heat°™ - Speed

Electrical Troubleshooting.

FLIR’s Innovative Lepton® IR Imaging Engine

• Instantly shows what’s hot and where to aim

• Eliminates blind guesswork

• 24:1 spot size ratio for safer distance measuring

Grab and Go Simplicity.

Fire It Up and Get to Work in Seconds

• Intuitive to operate with no special training required

• Easily save images and data for documentation

• Download images fast over USB or from removable micro SD

Rugged and Reliable.

Designed for the Harshest Environments

• Built to withstand a 2 meter drop

• Covered by FLIR’s exclusive 2-10 warranty

• Compact and durable to easily stow in a crowded tool bag

FLIR TG167

Spot Thermal Camera

www.ﬂir.com/TG167

Mechanical Overheating

Electrical Troubleshooting

PAGE 1
FLIR TG167 Spot Thermal Camera The FLIR TG167 Spot Thermal Camera bridges the gap between single spot infrared thermometers and FLIR’s legendary thermal cameras. Equipped with FLIR’s exclusive Lepton® micro thermal sensor, the TG167 lets you see the heat so you know where to reliably measure it. Designed for indoor electrical inspection, the TG167 will help you easily find unseen hot and cold spots in electrical cabinets or switch boxes, giving you quality image detail on even small connectors and wires.
PAGE 2
Specifications Imaging and optical data IR resolution 80 × 60 pixels Thermal sensitivity/NETD < 150 mK Field of view (FOV) 25° × 19.6° Minimum focus distance 0.1 m (4 in.) Distance to spot ratio 24:01:00 Image frequency 9 Hz Focus Detector type Focus free Focal plane array (FPA), uncooled microbolometer Spectral range 8–14 μm Display 2.0 in. TFT LCD Object temperature range –25 to +380°C (–13 to +716°F) Accuracy ±1.5% or 1.5°C (2.7°F) Minimum measurement distance 26 cm (10 in.