User Guide

10
March 30, 2020
Recording Mode Setup
First Time Configuration Wizard User Guide
8 Recording Mode Setup
The chosen Recording Mode will determine how the connected cameras are set to record when the Wizard is
complete.
Figure 7: Recording Mode screen
Note: These settings can be changed at any time for each individual camera through the Meridian Admin
Center
Always Recording
Cameras will record 24/7, using the video settings assigned to the camera, either by default or as modified
individually by the user.
Motion Detection
Cameras will only record when they detect motion. The default motion recording settings are 30 seconds pre-
and post-motion. This can be changed later on through the Meridian Admin Center.
Note: After launching the Meridian Admin Center, it is recommended that the user checks that the motion zone
and motion settings (Sensitivity and Threshold), which the system set automatically, are suitable.
When finished, click Next.