Manual

93
Remote Setup
3. Click Clear All to remove motion detection
from all cells. Grid cells should be green.
4. Click the radio button to select the size of
cursor—1x1, 3x3, or 5x5.
5. Select cells in the grid to enable with
motion
detection. Enabled cells should
turn from green to clear.
6. Click OK to
save your grid configur
ation or
click Cancel to exit without saving.
7. To save your settings to your DVR, click
Update to DVR.
Sensor Input
Configure the sensors connected to the
system. Depending on your model, you can
connect from 4 to 16 sensors.
To configure sensor input:
1. Click the drop-down menu for each
respective channel and select one of the
followin
g:
• NORMAL OPEN: The sensor is open at
normal times.
• NORMAL CLOSE: The senor is closed at
normal times.
• NOT USED: No sensors are connected to
the system (default for all channels)
2. To save your settings to your DVR, click
Update to
DVR.
Figure 25.6 Motion Area Setup
Figure 25.7 Sensor Input options