Manual

Table Of Contents
94
Remote Setup
Relay Output
Configure the relays on the DVR.
To configure relay output options:
1. Under RELAY SELECT, select one of the
following from the drop-down menu:
• NOT USED
• ALARM
• LOSS
• MOTION
• HDD ERROR
• POWER
• USER
• REC
2. Under RELAY OUTPUT TIME, click
to set the length of the relay time from
1~30 seconds.
3.
To save your settings to your DVR, click
Update to DVR.
System
The System tab contains the following options:
• SYSTEM
• CLOCK
• ADVANCED SETUP
System
To configure system options:
1. Under VIDEO STANDARD, select NTSC,
PAL, or AUTO from the drop-down menu.
NOTE: If you select
AUTO, the system w
ill
automatically detect NTSC or PAL.
2. Under LANGUAGE, select English,
Korean, Polish, Spanish, Russian,
French, Turkish,
German, Italian, or
Portuguese.
3. Under REMOTE CONTROL ID, select
11,12, 13, 14, 21, 22, 23, 24, 3
1, 32, 33,
34, 41, 42, 43, 44, or ALL.
4. Under KEY ECHO, select ON or OFF. If
ON, the DVR will
beep when ever you
press buttons on the remote control or
front panel.
5. To save your settings to your DVR, click
Update to DVR.
Figure 25.8 Relay Output options
Figure 26.0 System tab