Manual

110
Appendix C: Setting Up DDNS Service
How Do I Enable DDNS On My System?
Once you have registered for free DDNS service, use the information in the confirmation email to
configure DDNS settings on your system.
To enable DDNS on your system:
1. Press the
button to open the Main Menu.
2. Select
and press the button.
3. From the Link menu, select DYNAMIC DNS and press the
button.
4. Select DDNS and press the
buttons to select ON.
5. Press the
buttons and the buttons to select and input data for the following:
• DOMAIN NAME
• USER NAME
• PASSWORD
The Character Table will ope
n for you to input the data from
the
confirmation email.
NOTE: Only
the first p
art of the Domain Na
me is required
for setup on the system. For example, if the full domain
sent is tomsmith.ddns.digimerge.net, you only need to
enter tomsmith on the system.
6. Press the button on the remote control until you see
the Save/Exit screen. Select SAVE ONLY or SAVE AND EXIT to save your settings.
Figure 33.3 DDNS menu
Figure 33.4 Use the Character table to input
your domain name, username,
and password