Manual

Table Of Contents
3
FRONT PANEL
1. Power Button: Press to turn the system ON/OFF
2. Mini-Jack (2.5mm): Connect an IR extension cable.
3. LEDs: System power and Alarm LED indicators.
4. Channel Buttons: Press to
view channels 1~9; press +10 then 0~6 to select channels 10~16*.
5. Spot Monitor Out/ESC: Press to view the Spot Monitor; In system menus, returns to previous menu.
6. Navigation Buttons:
S: Navigate Up; open System Menu
T: Navigate Down; open Picture-in-Picture (PIP)
W: Navigate Left; open Alarm
X: Navigate Right; open Zoom
7. Stop: Press to stop playback.
8. Play: Press to st
art playback.
9.
/: Press to pause playback; press again to resume playback.
10. FF: Press to increase pla
yback speed: 1X, 2X, 4X, 16X, 32X, 64X, 128X.
11. Playback Direction: Press to swit
ch between Reverse and Forward playback.
12. Record: Press to comm
ence Recording.
13. LEDs: Record, HDD
, and LAN LED indicators.
14. USB Port: Connect external USB
hard drives or external CD-RW/DVD-RW drives for system backup;
connect USB flash drive to install firmware updates; connect a USB mouse.
15. : Press to switch display modes: Single, Quad, 6, 7, 9, 10, 13, and 16-split screen.
16. Audio: Select audio channels.
†If you have passwords enabled on the system, the system will prompt you for your password prior to shut-down.
*Channels 9~16 only available on 16-channel models.
NOTE: You can use the
Navigation Buttons to control
movement of connected PTZ
cameras (not included).