Manual

Table Of Contents
13
Using the System
Setting the Time
It is highly recommended to set the time on the system prior to doing any recording. You can set
the time manually, or set the time according to an Internet server (Internet connection and DDNS
service required)
To set the date and time:
1. Press the
button to open the system menu. Select and press the button.
2. Select CLOCK and press the button.
3. Fro
m the CLOCK menu, select DATE&TIME and press the button.
4. Press the buttons to
select the year, month, day
, hour, minute, and seconds.
Press the buttons to adjust the date and time
.
5. Press the button to save the date and time.
6. Press the button on the remote control until you see the Save/Exit screen. Select SAVE
ONLY or SAVE AND EXIT to save your settings.
You can a
lso configure the time zone, daylight savings time, and have the system to use the
Int
ernet to set the time (network connection required). See “CLOCK” on page 39.
Figure 4.0 Clock menu