Manual

Table Of Contents
19
Using the System
BLOCK SEARCH
Use Block Search to search for recorded video
according to blocks on the hard disk.
NOTE: Block Search is recommended in
case of a failure when using
other search
modes.
To use Block Search:
1. Under HDD ID, select NORMAL, HDD 1,
or HDD 0.
NOTE: No
rmal is the default selection for
the single hard drive included
with the
system.
2. Under SEARCH TIME, press the
buttons to select the year, month, day,
ho
ur, minute, and second, and then
press
the
buttons to change the values.
3. Press the button to view the blocks for
the selected date and time.
4. Press the
buttons to select a block
and then press the button to playback
the video.
5. Press the button to exit playback
mode and return to live mode (If using a
mouse: right-click or move th
e scroll wheel
to exit playback).
FILE SEARCH
Use File Search to search for video files saved
to an external USB drive or USB flash drive
(not included).
To use File Search:
1. If you already have an external USB drive
co
nnected to the system, procee
d to step
2. If not, connect a USB flash drive (that
contains saved video data) to the front
panel of the system.
2. From the SEARCH menu, select FILE
SEAR
CH and press the button.
3.
Under
MEDIA, press the
buttons to
select USB_FRONT, USB_R
EAR1, or
USB_REAR2 and press the button. A
list of
.dvr files appears on the screen.
4. Press the
buttons to select a file
and press the button to begin
playback.
5. Press the button to exit playback
mode and return to live mode (If using a
mouse: right-click or move the
scroll wheel
to exit playback).
Figure 6.5 Block Search screen
Figure 6.6 File Search screen