Manual

21
Using the System
TEXT SEARCH*
Use the Text Search to find recorded data from
a P.O.S. system.
To use Text Search:
1. From the SEARCH menu, select TEXT
SEARCH and press the button.
2. Unde
r HDD ID, select NORMA
L, HDD 1,
or HDD 0.
NOTE: No
rmal is the default selection for
the single hard drive included
with the
system.
3. Press the button to view all the Text
marks on the system. Go step 4.
OR
3. Press the buttons to select a specific
date and time. Pr
ess the buttons to
change the values and then press the
button to view bookmarks.
4. Press the
buttons to select a Text
mark from the list and then press the
button to begin playback.
5. Press the button to exit playback
mode and return to live mode (If using a
mouse: right-click or move th
e scroll wheel
to exit playback).
LOG FILE
Use the Log File to see a list of the activities
and events on the system.
NOTE: You must connect a USB drive to
the system in order to view log files.
To view the Log
File:
1. If not already connected, connect a USB
flash drive
to the front panel of the system.
2. From the SEARCH menu, select LOG
FILE and press the button.
3. Press the
button to view log for the
entire system.
OR
3. Under SEARCH FILE, press the
butt
ons to select a spec
ific date and time.
Pr
ess the buttons to change the values
and then press the button to view the
log for that specific date.
4. Press the
buttons to scroll down
the list of files.
5. To save the log file, press the button
to return to SEARCH FILE. Select SAVE
LOG a
nd press the button. The log
file
is saved to the connected USB drive as
DvrLog.txt
Figure 6.8 Text Search screen
Figure 6.9 Log File screen
*Compatible P.O.S. system required.