Manual

23
Using the Main Menu
QUICK
Set Quick Setup to AUTO, MANUAL, or OFF.
OFF: Disables Quick Setup.
MANUAL: Change the values for all the
op
tions of the Quick Setup menu.
• IMAGE SIZE: 720x480, 720x240, 360x240
• RECORD FRAME: Varies
based on Image
Size
• IMAGE QUALITY: Low, No
rmal, Fine, and Best
• EVENT: Alarm,
V-Loss (Video loss), Motion,
Alarm & Loss, Alarm & Motion, Loss & Motion,
All, and Off
• PRE RECORD TIME: The length of time the
system
records prior to an event. Set from 0~5
seconds
• POST RECORD TIME: The leng
th of time the
system continues to record after an event. Set
from 0~60 seconds
• PREVIEW QUALITY: Select to open the
Record Quality menu. Change the Record
Quality to Low, Normal,
Fine, or Best.
NOTE: Note: You must have Record
disabled
to view the Record Quality screen.
• A
UDIO RECORD: Set to O
n/Off
• REMOTE CONTROL ID: Designate an I
D for
the remote control to use with the system. Set
from 11, 12, 13, 14, 21, 22, 23, 24, 31, 32, 34,
41, 42, 43, 44, and ALL
• SAVE: Select to save your settings.
AUTO: Use AUTO to quickly maximize your
recording time based on images size, quality,
and recording time.
• IMAGE SIZE: 720x480, 720x240, 360x240
• IMAGE QUALITY: Low, Norma
l, Fine, and Best
• RECORD TIME: Set fr
om 1~999 days.
• MAX RECORDABLE TIME: The sys
tem
calculates the maximum recording time
available on the hard drive based on changes
to Image Size, Image Quality, and Record
Time (non-selectable).
• TOTAL RECORD
FRAME: Base
d on the
values you input for Record Time, Image Size,
and Image Quality, the system calculates the
adequate frames-per-second for the
recording. A short recording time will result in
a higher FPS rate (i.e. 30 fps), while a long
recording period will result in a lower FPS rate
(i.e. 16 fps)
• PREVIEW QUALITY:
Select to o
pen the
Record Quality menu. Change the Record
Quality to Low, Normal, Fine, or Best.
• AUDIO RECORD: Enable/
disable audio
recording
NOTE: An audio capable camera (not
included) or micro
phone (not included) are
necessary is necessary for audio recording.
• REMOTE CONTROL ID: Design
ate an ID for
the
remote control to use with the system. Set
from 11, 12, 13, 14, 21, 22, 23, 24, 31, 32, 34,
41, 42, 43, 44, and ALL
• SAVE: Select to save your settings.
Select SAVE and press the button on the
remote control (double-click SAVE if using a
mouse) to save your settings.
Figure 8.0 Quick Setup menu
QUICK
Open the Quick setup menu to easily apply recording parameters for the system.
NOTE: QUICK overrides any recording program you may enable from the
RECORD menu.