Manual

33
Using the Main Menu
RECORD LIMIT
Set a recording limit for your system.
To set the record limit:
1. Press the buttons to set the value for
the record limit. Set from 1~6 days, 1~4
we
eks, 1~11 months, 1
year, and OFF.
2. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY
or SAVE AND EXIT
to save your settings.
BACKUP MODE
Use Backup Mode to automatically copy
recorded events (motion detection, alarm,
video loss) to an external USB hard drive, or to
enable disk mirroring. Mirroring enables the
system to write data to the internal hard disk
and an external USB hard drive(s)
simultaneously.
NOTE: In order to use Event or Mirror
backu
p, you must have at least one external
USB hard drive connected to either of the
USB ports on the rear panel of the system.
Event
With your Backup Mode set to Event, the
system will copy only recorded events (motion
detection, alarm, video loss) to a connected
USB external hard drive.
To set Event backup mode:
1. Select BACKUP MODE.
2. Press the but
tons and select EVENT.
3. Press the button on
the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AN
D EXIT
to save your settings.
Figure 10.7 Setting the Record Limit
Figure 10.8 Backup Mode: Event