Manual

Table Of Contents
34
Using the Main Menu
Mirror
With your Backup Mode set to Mirror, the
system will write data to its internal hard disk
and a connected external USB hard drive (not
included) simultaneously.
NOTE: Make sure you have connected an
external USB
hard drive to either of the USB
ports on the rear panel of the system prior
to enabling the disk mirror function.
To enable disk mirroring:
1. Select BACKUP MODE.
2. Press the butto
ns and select
MIRROR.
3. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.
For details
on disk mirroring, see “Appendix K:
Using Disk Mirroring” on page 123.
ATTENTION: You must have Overwrite
enabled on the system in order to use disk
mirroring. The connected external USB
hard drive must be of equal or larger
capacity than the internal hard drive of
the system.
Figure 10.9 Backup Mode: Mirror