Manual

41
Using the Main Menu
ADVANCED SETUP
Configure advanced system settings, including
passwords, user authority, and DVR menu
setup.
From the SYSTEM menu, select ADVANCED
SETUP and press the
button.
Managing Passwords
To change your password:
1. From the Advanced Setup menu, select
PASSWORD CHECK and press the
buttons to set to ON/OFF.
NOTE: If you leave Password Check set to
OFF, you cannot edit p
asswords.
2. Select SET PASSWORD and press the
button. The password screen opens.
3. Select ADMIN, or USER1~USER4 and
press the
button. The password input
screen opens.
4. Under NEW PASSWORD, press channel
buttons 1~9 on the remote control to enter
an 8
-digit password. Under RE-TYPE,
enter the password again for verification.
5. Press the button on the remote
control until you see the Save/Exit screen.
Select SAVE ONLY or SAVE AND EXIT
to save your settings.
NOTE: Yo
u can
only use channel buttons
1~9 to enter the pa
ssword. The password
must be 8 digits long. The default system
passwords are the following:
• ADMIN: 11111111
• USER1: 22222222
• USER2: 33333
333
• USER3: 44444444
• USER4: 55555555
NOTE: The system supports a maximum of
16 simultaneous users. Fo
r example, one
person logged in as ADMIN, five persons
logged in as USER 1, four persons logged
in as USER 2, three persons logged in as
USER 4, and three persons logged in as
USER 5.
NOTE: The number of connected users can
affect network performan
ce. Please keep in
mind bandwidth restrictions and LAN
settings if allowing multiple users to log in
to the system.
Figure 12.3 Advanced Setup menu
Figure 11.4 Advanced Setup menu
ATTENTION: For security, you should
change your ADMIN and USER password
after first purchasing the system.