Manual

Table Of Contents
84
Remote Setup
(i.e. 30 fps), while a long recording period will
result in a lower FPS rate (i.e. 16 fps)
AUDIO RECORD: Set to ON/OFF
No
te: An audio capable camera (not
included) o
r microphone (not included) are
necessary is necessary for audio recording.
R
EMOTE CONTROL ID: Designate
an ID for
the remote control to use with the system. Set
from 11, 12, 13, 14, 21, 22, 23, 24, 31, 32,
34, 41, 42, 43, 44, and ALL
To save your settings to the DVR, click Update
to DVR.
Screen
The Screen tab contains the following options:
• AUTO SEQUENCE
• DISPLAY
• TITLE
• MULTI SCREEN
• COVERT
• SPOT
• CAMERA
Auto Sequence
Configure full-screen and multi-screen display
settings for Auto Sequence mode.
To configure Auto Sequence:
1. Under AUTO-SINGLE, click to
increase/decrease for individual channels.
The
higher the dwe
ll time, the longer the
channel will remain displayed on screen.
2. Check VIDEO LOSS SKIP to remove
disconnected channels from Aut
o
Sequence.
3. Check ADD AUTO SINGLE to enable/
disable single channels from Auto
Sequence. If disabled, all single
(full-screen) channels will be
skipped while
in Auto Sequence.
4. Under AUTO-SPLIT, click to
increase/decrease the dwell time for the
various multi-screen displays.
5. To save your sett
ings to the DVR, click
Update to DVR.
Figure 24.0 Screen: Auto Sequence