Manual

Table Of Contents
87
Remote Setup
LIVE: Selected channels appear hidden
during live mode
PLAY: Selected channels appear hidden
duri
ng playback
NETWORK: Selecte
d channels appear
hidden on network viewer screen
LV&PB (Live and Playback): Selected
channels appear hidden during live mode
and playback
LV&NW: Selected channels appear
hidden during live mod
e and in the network
viewer
PB&NW: Selected channels appear
hidden during playback and in the network
viewer
LV&PB&NW: Selected channels appear
hidden during live mode, playback, and in
the network viewer
3. Under COVERT TITLE DISPLAY, select
ON/OFF fro
m the drop-down menu.
If ON,
the title, "COVERT" will appear as the
channel title on screen.
4. To save your settings to your DVR, click
Update to DVR.
Spot
Adjust the settings for the Spot monitor (not
included).
To configure spot options:
1. Under SPOT MODE, select one of the
following from the drop-down menu:
MANUAL: Manually select the channel for
the Spot Monitor
SEQU
ENCE: Single channels (full screen)
will be displayed in an alternating
sequence
EVENT:
T
he channel where an event
(motion, alarm, sensor) has
occurred will
be displayed on the Spot Monitor
2. Under SPOT SEQUENCE TIME, click
to increase/decrease the dwell tim
e for the
channels appearing on the spot monitor
(from 1~60 seconds). The higher the dwell
time, the longer the channel will be
displayed on screen on the spot monitor.
3. Under ADD SPOT MULTI, select ON/OFF
from the drop-down menu. If ON,
this
Figure 24.4 Spot options