User's Manual
Table Of Contents
- 1 Advisories
- 2 Safety
- 3 Introduction
- 4 Product Description
- 5 Quick Start (en)
- 6 Control Buttons
- 7 Touch Screen Icons
- 8 Settings Menu
- 8.1 Settings Menu Overview
- 8.2 Menu Item Descriptions
- 8.2.1 Probe Selection (visual cameras only)
- 8.2.2 Language
- 8.2.3 Wi-Fi Menu
- 8.2.4 Display Grid (visual cameras only)
- 8.2.5 Timestamp
- 8.2.6 External Microphone
- 8.2.7 USB Card Reader
- 8.2.8 SD Card
- 8.2.9 Image (visual cameras only)
- 8.2.10 Measurement Parameters (IR camera only)
- 8.2.11 Auto Power Off (APO)
- 8.2.12 Date / Time
- 8.2.13 Recording Quality (visual cameras only)
- 8.2.14 Information (Info)
- 8.2.15 Aspect Ratio (IR camera only)
- 8.2.16 Regulatory
- 9 Image and Video Recording
- 10 Rechargeable Battery
- 11 Temperature Alarm (IR Camera)
- 12 Wi-Fi Connectivity
- 13 PC Interface
- 14 Firmware Updates
- 15 FCC and IC Notices
- 16 Specifications
- 17 CUSTOMER SUPPORT
- 18 Warranty
Product Description
4
4.1 Front View
Note that not all display icons can be represented in Figure 4.1 at one time be-
cause of differences in operational modes; display icons not shown here are
explained in their relevant sections.
Figure 4.1 Front View of Monitor
1. Control buttons. See Section 6.
2. Status LED: Blue when power is on (charger not connected); green when
charging with power off; cyan (light blue) when charging with power on; no
light when fully charged (with charger attached).
3. Probe connection.
4. Charging/PC interface USB-C port.
5. Compartment for reset button, micro SD card slot, micro HDMI port.
6. Audio headset/microphone connector (for recording audio over videos).
7. Temperature scale bar graph (IR camera).
8. Upper temperature range limit (IR camera).
9. Lower temperature range limit (IR camera).
10. Battery status icon.
11. Touch screen icons.
12. Camera images and menu screens.
#NAS100101; r. AB/85156/85156; en-US
7