User's Manual
Table Of Contents
- 1 Advisories
- 2 Safety
- 3 Introduction
- 4 Product Description
- 5 Quick Start (en)
- 6 Control Buttons
- 7 Touch Screen Icons
- 8 Settings Menu
- 8.1 Settings Menu Overview
- 8.2 Menu Item Descriptions
- 8.2.1 Probe Selection (visual cameras only)
- 8.2.2 Language
- 8.2.3 Wi-Fi Menu
- 8.2.4 Display Grid (visual cameras only)
- 8.2.5 Timestamp
- 8.2.6 External Microphone
- 8.2.7 USB Card Reader
- 8.2.8 SD Card
- 8.2.9 Image (visual cameras only)
- 8.2.10 Measurement Parameters (IR camera only)
- 8.2.11 Auto Power Off (APO)
- 8.2.12 Date / Time
- 8.2.13 Recording Quality (visual cameras only)
- 8.2.14 Information (Info)
- 8.2.15 Aspect Ratio (IR camera only)
- 8.2.16 Regulatory
- 9 Image and Video Recording
- 10 Rechargeable Battery
- 11 Temperature Alarm (IR Camera)
- 12 Wi-Fi Connectivity
- 13 PC Interface
- 14 Firmware Updates
- 15 FCC and IC Notices
- 16 Specifications
- 17 CUSTOMER SUPPORT
- 18 Warranty
Product Description
4
4.2 Top View
Figure 4.2 Top View of Monitor
1. Neck and hand strap fasteners. One on each corner of the unit.
2. Probe connector. Line up the white dots on the probe connector and the
display unit connector when attaching the probe.
3. USB-C port for PC interface and battery charging.
4.3 Right Side View
Figure 4.3 Right Side View of Monitor
1. Compartment latch. Push latch upward to access the compartment (the
compartment contains items 3, 4, and 5, listed below).
2. Audio connector (3.5 mm) for voice-over video recording using the sup-
plied earpiece microphone.
3. Reset button. Press the recessed button for 2 seconds to reset the unit in
the event of a system crash.
4. Micro SD card slot. Do not remove or replace the SD card while the VS80
is powered. Do not use cards that have been formatted by another camera
or system.
5. Micro HDMI port for connecting an external monitor. Note that Wi-Fi is not
operable when an external monitor is connected.
#NAS100101; r. AB/85156/85156; en-US
8