User's Manual
Table Of Contents
- 1 Advisories
- 2 Safety
- 3 Introduction
- 4 Product Description
- 5 Quick Start (en)
- 6 Control Buttons
- 7 Touch Screen Icons
- 8 Settings Menu
- 8.1 Settings Menu Overview
- 8.2 Menu Item Descriptions
- 8.2.1 Probe Selection (visual cameras only)
- 8.2.2 Language
- 8.2.3 Wi-Fi Menu
- 8.2.4 Display Grid (visual cameras only)
- 8.2.5 Timestamp
- 8.2.6 External Microphone
- 8.2.7 USB Card Reader
- 8.2.8 SD Card
- 8.2.9 Image (visual cameras only)
- 8.2.10 Measurement Parameters (IR camera only)
- 8.2.11 Auto Power Off (APO)
- 8.2.12 Date / Time
- 8.2.13 Recording Quality (visual cameras only)
- 8.2.14 Information (Info)
- 8.2.15 Aspect Ratio (IR camera only)
- 8.2.16 Regulatory
- 9 Image and Video Recording
- 10 Rechargeable Battery
- 11 Temperature Alarm (IR Camera)
- 12 Wi-Fi Connectivity
- 13 PC Interface
- 14 Firmware Updates
- 15 FCC and IC Notices
- 16 Specifications
- 17 CUSTOMER SUPPORT
- 18 Warranty
Settings Menu
8
8.2.9 Image (visual cameras only)
Tap to open the Image Brightness, Contrast, and Sharpness control menu.
Figure 8.6 Image Settings Menu
Tap and drag the sliders (2) as desired. Tap DEFAULT (3) to reset the image
settings. Tap the left arrow (1) to return to the main menu.
8.2.10 Measurement Parameters (IR camera only)
Tap to open the Measurement Parameters menu.
Figure 8.7 Measurement Parameters Settings Menu
Program the Emissivity (2) and Reflected Temperature (3) values using the
up/down touch-screen icons. Select the unit of measure by tapping ℃ or ℉
(4). Tap the left arrow (1) to return to the main menu.
Note on Emissivity: For most applications, the default emissivity setting of
0.95 is a good place to start. For shiny, reflective surfaces, an emissivity ad-
justment is likely needed. To learn more about emissivity, and how to adjust it,
follow the link below.
#NAS100101; r. AB/85156/85156; en-US
23