User's Manual
Table Of Contents
- 1 Advisories
- 2 Safety
- 3 Introduction
- 4 Product Description
- 5 Quick Start (en)
- 6 Control Buttons
- 7 Touch Screen Icons
- 8 Settings Menu
- 8.1 Settings Menu Overview
- 8.2 Menu Item Descriptions
- 8.2.1 Probe Selection (visual cameras only)
- 8.2.2 Language
- 8.2.3 Wi-Fi Menu
- 8.2.4 Display Grid (visual cameras only)
- 8.2.5 Timestamp
- 8.2.6 External Microphone
- 8.2.7 USB Card Reader
- 8.2.8 SD Card
- 8.2.9 Image (visual cameras only)
- 8.2.10 Measurement Parameters (IR camera only)
- 8.2.11 Auto Power Off (APO)
- 8.2.12 Date / Time
- 8.2.13 Recording Quality (visual cameras only)
- 8.2.14 Information (Info)
- 8.2.15 Aspect Ratio (IR camera only)
- 8.2.16 Regulatory
- 9 Image and Video Recording
- 10 Rechargeable Battery
- 11 Temperature Alarm (IR Camera)
- 12 Wi-Fi Connectivity
- 13 PC Interface
- 14 Firmware Updates
- 15 FCC and IC Notices
- 16 Specifications
- 17 CUSTOMER SUPPORT
- 18 Warranty
Settings Menu
8
Note on Reflected Temperature: Set the Reflected Temperature to the am-
bient temperature in the test area, to start. If surrounding objects are interfer-
ing with your measurements, an adjustment to the Reflected Temperature
setting may be needed. Refer to the link below for more information.
Emissivity and Reflected Temperature Information
8.2.11 Auto Power Off (APO)
Tap to open the APO menu.
Figure 8.8 APO Settings Menu
To set APO, tap 5, 10, 20, 30 minutes (3) or Disable (2). Tap the left arrow (1)
to return to the main menu.
8.2.12 Date / Time
Tap to open the Date/Time menu.
Figure 8.9 Date/Time Settings Menu
Use the touch-screen arrows to set the date (2) and the time (3). Tap the up/
down arrows (4) to select the display format for month (MM), day (DD), and
#NAS100101; r. AB/85156/85156; en-US
24