User's Manual
Table Of Contents
- 1 Advisories
- 2 Safety
- 3 Introduction
- 4 Product Description
- 5 Quick Start (en)
- 6 Control Buttons
- 7 Touch Screen Icons
- 8 Settings Menu
- 8.1 Settings Menu Overview
- 8.2 Menu Item Descriptions
- 8.2.1 Probe Selection (visual cameras only)
- 8.2.2 Language
- 8.2.3 Wi-Fi Menu
- 8.2.4 Display Grid (visual cameras only)
- 8.2.5 Timestamp
- 8.2.6 External Microphone
- 8.2.7 USB Card Reader
- 8.2.8 SD Card
- 8.2.9 Image (visual cameras only)
- 8.2.10 Measurement Parameters (IR camera only)
- 8.2.11 Auto Power Off (APO)
- 8.2.12 Date / Time
- 8.2.13 Recording Quality (visual cameras only)
- 8.2.14 Information (Info)
- 8.2.15 Aspect Ratio (IR camera only)
- 8.2.16 Regulatory
- 9 Image and Video Recording
- 10 Rechargeable Battery
- 11 Temperature Alarm (IR Camera)
- 12 Wi-Fi Connectivity
- 13 PC Interface
- 14 Firmware Updates
- 15 FCC and IC Notices
- 16 Specifications
- 17 CUSTOMER SUPPORT
- 18 Warranty
Settings Menu
8
year (YY): MM/DD/YY, DD/MM/YY, or YY/MM/DD. Tap the up/down arrows (5)
to select the 12 or 24 hour clock. Tap the left arrow (1) to return to the main
menu.
8.2.13 Recording Quality (visual cameras only)
This setting applies to video recording only. Tap to open the Recording Quality
menu.
Figure 8.10 Recording Quality Settings Menu
Tap Normal or High Quality (2). In Normal mode, video is recorded at a rate of
1 M bits/s (megabits per second), in High Quality mode the bit rate is 2 M bits/
s. Tap the left arrow (1) to return to the main menu. The higher quality mode
will result in file sizes proportionately larger than those of normal quality.
8.2.14 Information (Info)
Tap to open the Information menu.
Figure 8.11 Information Settings Menu
View the firmware version (2) and serial number (3). Tap FIRMWARE UP-
GRADE (4) to upgrade the VS80 firmware. Tap FACTORY DEFAULT (5) to
#NAS100101; r. AB/85156/85156; en-US
25