User's Manual
Table Of Contents
- 1 Advisories
- 2 Safety
- 3 Introduction
- 4 Product Description
- 5 Quick Start (en)
- 6 Control Buttons
- 7 Touch Screen Icons
- 8 Settings Menu
- 8.1 Settings Menu Overview
- 8.2 Menu Item Descriptions
- 8.2.1 Probe Selection (visual cameras only)
- 8.2.2 Language
- 8.2.3 Wi-Fi Menu
- 8.2.4 Display Grid (visual cameras only)
- 8.2.5 Timestamp
- 8.2.6 External Microphone
- 8.2.7 USB Card Reader
- 8.2.8 SD Card
- 8.2.9 Image (visual cameras only)
- 8.2.10 Measurement Parameters (IR camera only)
- 8.2.11 Auto Power Off (APO)
- 8.2.12 Date / Time
- 8.2.13 Recording Quality (visual cameras only)
- 8.2.14 Information (Info)
- 8.2.15 Aspect Ratio (IR camera only)
- 8.2.16 Regulatory
- 9 Image and Video Recording
- 10 Rechargeable Battery
- 11 Temperature Alarm (IR Camera)
- 12 Wi-Fi Connectivity
- 13 PC Interface
- 14 Firmware Updates
- 15 FCC and IC Notices
- 16 Specifications
- 17 CUSTOMER SUPPORT
- 18 Warranty
Wi-Fi Connectivity
12
6. Tap the VS80 from the list of available networks on your smart device be-
fore the 60 second timer counts down. See Figure 12.3 below for example
smart device screens.
7. When successfully connected, the Wi-Fi icon
will appear at the top
right of the VS80 display.
8. To disconnect Wi-Fi at any time, select ‘OFF’ from the Wi-Fi Setting menu
or press the
button.
Figure 12.3 Smart device setup example. Step 1, tap the Wi-Fi setting on your smart de-
vice. Step 2, tap the VS80 from the list of available networks. Step 3, note that the VS80 is
now the connected network and your personal network (‘My Network’, in this example) is now
in the available network list, but it is no longer connected. To return to your network, simply
tap your network name from the available networks (the VS80 will disconnect).
12.3 Using the FLIR Tools™ App
With FLIR Tools, you can view live VS80 camera images and video on your
smart device. You can also download previously recorded images and video
from the VS80 to the smart device. You cannot, however, capture a new image
or record a new video from the smart device, those actions can only be per-
formed using the control buttons on the VS80.
Follow these steps to set up FLIR Tools for the VS80 on your smart device:
1. Download and install FLIR Tools on the smart device.
2. Connect the smart device to the VS80 network via Wi-Fi, per the directions
in Sections 12.1 and 12.2, above.
3. Open FLIR Tools on the smart device.
4. Select the VS80 Wi-Fi network, from the list of available networks, on the
smart device.
#NAS100101; r. AB/85156/85156; en-US
35