User's Manual
Table Of Contents
- 1 Advisories
- 2 Safety
- 3 Introduction
- 4 Product Description
- 5 Quick Start (en)
- 6 Control Buttons
- 7 Touch Screen Icons
- 8 Settings Menu
- 8.1 Settings Menu Overview
- 8.2 Menu Item Descriptions
- 8.2.1 Probe Selection (visual cameras only)
- 8.2.2 Language
- 8.2.3 Wi-Fi Menu
- 8.2.4 Display Grid (visual cameras only)
- 8.2.5 Timestamp
- 8.2.6 External Microphone
- 8.2.7 USB Card Reader
- 8.2.8 SD Card
- 8.2.9 Image (visual cameras only)
- 8.2.10 Measurement Parameters (IR camera only)
- 8.2.11 Auto Power Off (APO)
- 8.2.12 Date / Time
- 8.2.13 Recording Quality (visual cameras only)
- 8.2.14 Information (Info)
- 8.2.15 Aspect Ratio (IR camera only)
- 8.2.16 Regulatory
- 9 Image and Video Recording
- 10 Rechargeable Battery
- 11 Temperature Alarm (IR Camera)
- 12 Wi-Fi Connectivity
- 13 PC Interface
- 14 Firmware Updates
- 15 FCC and IC Notices
- 16 Specifications
- 17 CUSTOMER SUPPORT
- 18 Warranty
PC Interface
13
13.1 PC Interface Overview
The VS80 PC interface utility allows you to download images and video to
your PC, see Section 9.
The PC interface also allows you to upgrade the VS80 firmware, see Section
14.
When connected to a PC, the VS80 also charges its battery. For quicker
charging, connect the VS80 to an AC power source using the supplied AC
adaptor and USB cable, see Section 10.
13.2 Connecting the VS80 to a PC
The VS80 is supplied with a USB-C to USB-A cable, connect the USB-C end
of the cable to the USB port at the top of the VS80 (to the right of the probe
connection) and the other end to the PC USB-A port. Depending on the type
of USB port on your PC, you may need to use a USB adaptor to connect
correctly.
Figure 13.1 Connect the VS80 to a PC using the supplied USB-C (VS80 port) to USB-A (PC
port) cable.
13.3 Accessing the VS80 Directory on the PC
When successfully connected, the PC will show a newly connected VS80
drive. Open the drive to see its root directory which contains the firmware file
and a set of folders. The Media folder is where images and videos, captured
by the VS80, are stored. There may be other folders present that are for sys-
tem use only.
You can then move images and video from the Media folder onto your PC hard
drive.
The VS80 root directory is where you place firmware update files. See Section
14 for firmware upgrade details.
#NAS100101; r. AB/85156/85156; en-US
36