User's Manual
Table Of Contents
- 1 Advisories
- 2 Safety
- 3 Introduction
- 4 Product Description
- 5 Quick Start (en)
- 6 Control Buttons
- 7 Touch Screen Icons
- 8 Settings Menu
- 8.1 Settings Menu Overview
- 8.2 Menu Item Descriptions
- 8.2.1 Probe Selection (visual cameras only)
- 8.2.2 Language
- 8.2.3 Wi-Fi Menu
- 8.2.4 Display Grid (visual cameras only)
- 8.2.5 Timestamp
- 8.2.6 External Microphone
- 8.2.7 USB Card Reader
- 8.2.8 SD Card
- 8.2.9 Image (visual cameras only)
- 8.2.10 Measurement Parameters (IR camera only)
- 8.2.11 Auto Power Off (APO)
- 8.2.12 Date / Time
- 8.2.13 Recording Quality (visual cameras only)
- 8.2.14 Information (Info)
- 8.2.15 Aspect Ratio (IR camera only)
- 8.2.16 Regulatory
- 9 Image and Video Recording
- 10 Rechargeable Battery
- 11 Temperature Alarm (IR Camera)
- 12 Wi-Fi Connectivity
- 13 PC Interface
- 14 Firmware Updates
- 15 FCC and IC Notices
- 16 Specifications
- 17 CUSTOMER SUPPORT
- 18 Warranty
Firmware Updates
14
5. For Figure 15.3, below, 1. Type VS80 in the search field; 2. Select FLIR /
Extech Meters Software from the pull-down menu; 3. Select FLIR Soft-
ware from the pull-down menu; 4. Click SEARCH; 5. Click the update file
to download it to your PC.
Figure 14.3 Follow the steps to complete the download process.
14.2 Moving the Upgrade File to the VS80
1. As explained in Section 13, PC Interface, connect the VS80 to the PC us-
ing the supplied USB cable.
2. When the VS80 is physically connected to the PC, the PC should recog-
nize the VS80 as an external storage drive. For Windows, the VS80 drive
will be given a drive letter in File Explorer (E:, for example). For Mac, the
VS80 drive icon will appear on the desktop.
3. Drag the downloaded firmware file from your PC to the root (top level) di-
rectory of the VS80 as shown in the Windows example below in Figure
15.4.
NOTE
Drag only the update file (FLIRVS80.BRN, for example) into the VS80 root directory. Do
not drag other files or folders that may accompany the update file (readme.txt, for
example).
Rename the existing firmware file to FLIRVS80-old.BRN, before loading the new update
file. This will allow you to revert to the earlier firmware version if necessary.
4. Safely eject the VS80 from the PC (for Windows, right-click the drive letter
in File Explorer and select Eject; For Mac, drag the drive icon into the
Trash).
5. Physically disconnect the VS80 from the PC.
#NAS100101; r. AB/85156/85156; en-US
38