User's Manual
Table Of Contents
- 1 Advisories
- 2 Safety
- 3 Introduction
- 4 Product Description
- 5 Quick Start (en)
- 6 Control Buttons
- 7 Touch Screen Icons
- 8 Settings Menu
- 8.1 Settings Menu Overview
- 8.2 Menu Item Descriptions
- 8.2.1 Probe Selection (visual cameras only)
- 8.2.2 Language
- 8.2.3 Wi-Fi Menu
- 8.2.4 Display Grid (visual cameras only)
- 8.2.5 Timestamp
- 8.2.6 External Microphone
- 8.2.7 USB Card Reader
- 8.2.8 SD Card
- 8.2.9 Image (visual cameras only)
- 8.2.10 Measurement Parameters (IR camera only)
- 8.2.11 Auto Power Off (APO)
- 8.2.12 Date / Time
- 8.2.13 Recording Quality (visual cameras only)
- 8.2.14 Information (Info)
- 8.2.15 Aspect Ratio (IR camera only)
- 8.2.16 Regulatory
- 9 Image and Video Recording
- 10 Rechargeable Battery
- 11 Temperature Alarm (IR Camera)
- 12 Wi-Fi Connectivity
- 13 PC Interface
- 14 Firmware Updates
- 15 FCC and IC Notices
- 16 Specifications
- 17 CUSTOMER SUPPORT
- 18 Warranty
FCC and IC Notices
15
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference
that may cause undesired operation.
FCC and IC Identification Numbers
FCC identification number: 2AXRO-VS80
IC identification number: 5306A-VS80
Federal Communications Commission Statement
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be re-
quired to correct the interference at his own expense.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
RF Exposure Warning
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm (7.9 in) from all persons and
must not be co-located or operating in conjunction with any other antenna or
transmitter. End-users and installers must be provided with antenna installa-
tion instructions and transmitter operating conditions for satisfying RF expo-
sure compliance.
Canada, avis d'Industry Canada (IC)
#NAS100101; r. AB/85156/85156; en-US
40