Datasheet

5 Operation
5.7.3 Deleting the picture/video memory
1. In the setup menu, select DELETE ALL. Refer to section 5.2 Setup menu,
page 13.
The ERASE YES/NO box appears.
2. Press the
button to select YES. Press the button to delete all files
in the memory.
Press the
button to exit without deleting the file.
5.8 Video output to a TV or external monitor
The monitor can be set to output the high-quality video to a TV or other external
video monitor.
1. In the setup menu under VIDEO FORMAT, select PAL or NTSC to match the
TV/external monitor to be used. Refer to section 5.2 Setup menu, page 13.
2. Connect the video cable to the video output jack, located on the bottom of
the monitor. Connect the other end of the cable to the video input jack of the
TV or other external monitor.
The high-quality video image is displayed on the TV/external monitor.
5.9 Reset
If the monitor becomes unresponsive due to electromagnetic interference or oth-
er magnetic event, use a paper clip or other narrow object to press the Reset but-
ton, located on the bottom of the monitor.
5.10 Rear stand
The rear stand can be set to three positions: lower position (stored), middle posi-
tion for bench viewing, and upper position for hanging.
#T559827; r. AE/36943/36943; en-US 20