Datasheet

5 Operation
2. Press and hold down the button for 3 seconds (long press) to start the
video recording. The
icons are displayed.
3. While recording, you can take a picture by pressing the
button (short
press).
4. Press and hold down the
button for 3 seconds (long press) to stop the
video recording.
5.2 Setup menu
Monitor settings are adjusted in the setup menu.
DELETE ALL Delete all stored pictures and videos.
VIDEO OUTPUT For two-camera probe, select the front view or the
side view camera.
DATE/TIME SETUP Select the date and time format, set the date and
time, and select display on/off (when on, the date
and time are shown on the display and on the pic-
tures/videos).
LANGUAGE Select the menu display language.
VIDEO FORMAT Set the video output to NTSC or PAL format.
Press either of the two camera buttons (upper right
or upper left button) to access the Factory Default
menu for camera brightness, contrast, hue, and
saturation settings. See section 5.3 Factory Default
Profiles menu, page 14 for more information.
AUTO POWER OFF Set auto power off to 5, 10, 15, or 30 minutes or
DISABLE.
INPUT SOURCE Set the input source to DIRECT or WIRELESS.
1. Press the
button to open the setup menu.
2. Press the
or button to navigate to the desired menu item.
3. Press the
button to select the highlighted menu item.
#T559827; r. AE/36943/36943; en-US 13