Datasheet

5 Operation
3. On the monitor, press and hold down the
button for 5 seconds to
switch on the monitor.
4. In the setup menu under INPUT SOURCE, select WIRELESS. Refer to sec-
tion 5.2 Setup menu, page 13.
5. On the wireless transmitter, press and hold down the
button for 5 sec-
onds to switch on the transmitter. The camera video is displayed on the mon-
itor display.
5.6.2 Wireless transmitter—direct version
1. Attach the probe to the wireless transmitter.
2. Connect the wireless transmitter to the probe connector on the monitor, us-
ing the supplied patch cable.
3. On the wireless transmitter, press and hold down the
button for 5 sec-
onds to switch on both the transmitter and the monitor. The camera video is
displayed on the monitor display.
4. In the setup menu under INPUT SOURCE, select DIRECT. Refer to section
5.2 Setup menu, page 13.
#T559827; r. AE/36943/36943; en-US 18