Datasheet

6 Maintenance

6.1 Cleaning

Clean the monitor, articulating probe, wireless transmitter, and accessories with

a damp cloth and mild detergent; do not use abrasives or solvents.

6.2 Battery recharging

1. Ensure that the monitor is switched off.

2. Connect the AC adaptor to the monitor.

3. After several hours, press the

button to switch on the monitor.

The battery voltage status is indicated on the display:

• The battery is fully charged:

• The battery charging is still in process:

4. If the battery is fully charged, remove the AC adaptor and observe that the

fully charged four-bar indicator appears:

5. If the battery is not fully charged, press the

button to switch off the

monitor and continue charging.

Note The battery will not charge properly if the monitor is switched on during

the charging cycle.

Note If the battery fails to charge, please contact FLIR Systems for battery re-

placement service. In order to maintain IP rating, the battery must be replaced by

authorized FLIR service personnel.

#T559827; r. AE/36943/36943; en-US 21