BACKSPLASH INFORMATION 8/27/2013
Backsplash - Vertical Installation 250.000 58.000 Side Splash Inside Corner J63-1451 End Cap Top of back splash is covered by the hood. 102.000 J63-1451 End Cap 80.000 Back Splash J64-1450 Divider Bars J64-1450 Divider Bars Ordering Notes: 1. 2. 3. 4. 5. Vertically installed backsplash is always used on height requirements over 48". End caps (part # J63-1451) are used to cover raw edges on ends of backsplash sections. Divider bars (part # J64-1450)are used to cover raw edges between adjacent panels.
Backsplash - Horizontal Installation 58.000 250.000 Side Splash J63-1451 End Cap Inside Corner Top of back splash is covered by the hood. 102.000 48.000 80.000 J63-1451 End Cap J64-1450 Divider Bars Back Splash Ordering Notes: 1. 2. 3. 4. 5. Backsplash may be installed horizontally when the specified width is 48" or less . End caps (part # J63-1451) are used to cover raw edges on ends of backsplash sections. Divider bars (part # J64-1450)are used to cover raw edges between adjacent panels.
Insulated Backsplash BACK SIDE (INSULATED AREA) FRONT SIDE WIDTH (per Nola) 1.000 HEIGHT (per Nola) 1.