Operation Manual

8
GB IE
Technical Specications
Engine ........... 4-stroke B&S 575 EX Series
B&S Engine design number ..............09P7
Engine size ...............................140 cm
3
Power input ................................ 2.1 kW
Blade rotation speed ...............2900 min
-1
Blade torque ........................... 35-45 Nm
Wheel drive .....................max. 3.8 km/h
Petrol tank volume ........................... 0.8 l
Octane rating ............................... 95-98
Engine oil tank volume ................... 0.47 l
Spark plug ............... Champion QC12YC
Cutting circle .......................... ø 460 mm
Cutting height ............. 7-stage, 30-95 mm
Grass collection box volume .............. 60 l
Weight (inc. collection box) ............ 30.6 kg
Sound pressure level
(L
pA) ................84.9 dB(A); K=3.0 dB(A)
Sound power level (L
WA)
measured ......94.4 dB(A); K=1.81 dB(A)
guaranteed ........................... 96 dB(A)
Vibration at the handle
(a
n) ................... 6.02 m/s
2
; K=1.5 m/s
2
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning:
The vibration emission value may
differ during actual use of the
power tool from the stated value
depending on the manner in which
the power tool is used.
Safety precautions aimed at protecting
the user should be based on estimated
exposure under actual usage conditions
(all parts of the operating cycle are to be
considered, including, for example, times
during which the power tool is turned off
and times when the tool is turned on but is
running idle).
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration of
conformity.
Technical and optical changes can be
carried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the basis
of the instruction manual, cannot thus be
considered as valid.