Operation Manual

4
GB IE
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
During production, this equipment has
been checked for quality and subjected
to a nal inspection. The functionality of
your equipment is therefore guaranteed. It
cannot be ruled out that residual quantities
of water or lubricants will remain on or in
the equipment/hose lines in isolated cases.
This is not a fault or defect and it repre-
sents no cause for concern.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating
and safety instructions. Use the
product only as described and for
the applications specied.
Keep this manual safely and in the
event that the product is passed on,
hand over all documents to the third
party.
Content
Introduction .................................4
Areas of Application ....................5
General Description ......................5
Scope of Delivery ..............................5
Overview ......................................... 5
Functional description ........................5
Technical Data ..............................6
Performance data ..............................6
Notes on Safety ...........................6
Explanation of symbols ......................6
Symbols in the manual ....................... 6
Special instructions for safe operating ..7
General notes on safety .....................7
Operational start-up ..................10
Assembly .......................................10
Connection of the pressure line .........10
To erect/suspend ............................10
Controls before operational start-up ... 11
Operation ..................................11
Mains connection ............................ 11
Switching on and off .......................11
Automatic mode..............................11
Manual mode/at suction ................12
Maintenance and Cleaning .........12
General cleaning instructions ............12
To replace the backow stop ............12
Clean pump pedestal ......................13
Storage ......................................13
Waste Disposal and Environmental
Protection ..................................13
Replacement parts/Accessories ..14
Troubleshooting .........................15
Guarantee .................................16
Repair Service ............................17
Service-Center ............................17
Importer ....................................17
Translation of the original
EC declaration of conformity ......63
Exploded Drawing .....................65