Operation Manual

5
GB IE
Overview
1 Carrying handle
2 Mains cable
3 Pump casing
4 Pump pedestal
5 Pump output
6 Float switch
7 Float switch height-adjustment
8 Float switch cable
9 Float switch guideway
10 Hose adaptor
11 backow stop (11a) with seal
(11b) (not visible)
12 Angle adaptor
13 8 m nylon rope
4a 4 screws, pump pedestal
4b Cover plate, pump pedestal
Functional description
The pump is tted with a oat switch,
which automatically switches the equip-
ment on or off.
In case of overload, the pump is switched
off by the integrated thermal protection
switch. After cooling, the motor restarts
automatically.
In addition, the pump also has a backow
stop that prevents water from owing back,
for example during an interruption in the
power supply.
Areas of Application
The submersible water pump acquired by
you is designed for pumping water with a
maximum temperature of 35°C.
This pump can be used e.g. to empty ba-
sins and tanks.
The pump is not suitable for commercial
use. Commercial use will invalidate the
guarantee.
The operator or user is responsible for ac-
cidents or damage to other people or their
property. The manufacturer shall not be
liable for damages caused by use other
than for which the equipment is intended
or by incorrect operation.
General Description
The illustration of the principal
functioning parts can be found
on the front foldout page.
Scope of Delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Submersible water pump (pump)
- Angle adaptor + hose adaptor
- 8m nylon rope
- Instructional manual