Operation Manual

15 GB/IE

Attaching a saw blade (see Fig. B)

Note: Keep the protective sleeve on the saw during installing or removing it from

the cutter.

j Unscrew and remove the thumbscrew and washer.

j Insert the saw blade.

j Guide the bolts through the holes in the saw blade.

j Re-insert the washer and secure the connection with the thumbscrew.

Using the loppers (see Fig. D)

j Loosen the retaining pin of the loppers.

j Pull the plastic handle down to make a cut.

j As soon as you have ﬁnished working with the loppers, secure with the

retaining pin.

Setting the cutting angle (see Fig. E)

j Turn the rotating disc clockwise and choose one of the seven available

angle adjustments.

j Turn the rotating disc anticlockwise to ﬁx it after the angle has been adjusted.

Note: Please ensure that the turning disc is ﬁxed, before starting work.