CORDLESS BRANCH CUTTER Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. PRC 9.6 CORDLESS Branch Cutter Kompernaß GmbH Burgstraße 21 D-44867 Bochum (Germany) Last Information Update: 10 / 2007 · Ident.-No.: PRC9.
10 1 2 8 7 5 4 A 11 3 B 12 13 C 6 7 9 D 7
Table of Content Introduction For your safety...............................................................................................................Page Equipment.......................................................................................................................Page Delivery scope...............................................................................................................Page Technical data........................................................................
Introduction The following pictogrammes / symbols are used in these operating instructions: Read instruction manual! W/mW Watts / Milliwatts Observe caution and safety notes! Safety class II Caution – electric shock! Dangerous electric current – danger to life! Wear hearing protection, dust protection mask, protective glasses and protective gloves. Explosive material! Keep children and other unauthorised personnel at a safe distance when using electrical tools.
Introduction / General safety advice Q Delivery scope General safety advice 1 cordless branch cutter 1 battery charger with cable and plug 1 operating instruction manual 1 “Warranty and Service” booklet Q Technical data J Attention! Please read all the instructions and advice. Failure to observe the instructions and advice given below may result in electric shock, fire and / or serious injury. MAKE SURE THAT YOU KEEP THESE INSTRUCTIONS AND SAFETY ADVICE IN A SAFE PLACE. Cordless branch cutter PRC 9.
General safety advice of electric shock. Do not use the mains lead for any purpose for which it was not intended, e.g. to carry the device, to hang up the device or to pull the mains plug out of the mains socket. Keep the mains lead away from heat, oil, sharp edges or moving parts of the device. Damaged or tangled mains leads increase the risk of electric shock. d) 3. Personal safety a) R emain alert at all times, watch what you are doing and always proceed with caution.
General safety advice / Starting operation Safety instructions specific to the tool J Check the condition of the device, charger 11 , lead 12 and plug 13 before starting to charge the device. Do not use the tool if any of the parts are damaged. Never open the tool. Repair or replacement must only be carried out by the Service Office or an electrical expert. Damaged tools, mains cables or mains plugs pose a danger to life as a result of electric shock.
Operation / Maintenance and cleaning / Disposal Q Operation Q Switching on / off Switching on j Switch on 1 to the front. j Press the On / Off switch 4 . You can obtain replacement saw blades from our Service Centres. Q Maintenance and cleaning J D anger: Only carry out maintenance and cleaning when the tool is switched off and the battery charger 11 is disconnected from the mains power.
Information Q Information Q Declaration Q Service centre We, Kompernaß GmbH, Burgstr. 21, D-44867 Bochum, Germany, declare that this product complies with the following EU directives: The service centre for your country is shown in the warranty documentation. J Have your device repaired only by qualified specialist personnel using original manufacturer parts only. This will ensure that your device remains safe to use.
12