INSTALLATION MANUAL METAL OUTDOOR PARCEL LOCKER TYPE 1 1590 SERIES TABLE OF CONTENTS DESCRIPTION PAGE 2 3 4 6 8 10 12 OPL INFORMATION SECURITY TOOL REQUIREMENTS SITE PREPARATION AND PEDESTAL INSTALLATION INSTALLATION OF THE MASTER LOAD ARROW LOCK PARCEL ARROW LOCK INSTALLATION PEDESTAL TO OPL INSTALLATION NUMBER PLACARDS INSTALLATION 93421_OPL_INSTALL www.florencemailboxes.
OPL INFORMATION METAL OPL TYPE I 1590 SERIES 1590T1AF INSTALLED HEIGHT 2 93421_OPL_INSTALL 1590T1AF 62” DEPTH 17-7/8” WIDTH 15-7/8” WEIGHT (WITHOUT PEDESTAL) 83 LBS WEIGHT (WITH PEDESTAL) 100 LBS QTY OF STANDARD COMPARTMENTS 0 QTY OF PARCEL COMPARTMENTS 2 PARCEL COMPARTMENT HEIGHT 19.8” PARCEL COMPARTMENT WIDTH 12.3” www.florencemailboxes.
SECURITY TOOL REQUIREMENTS METAL OPL TYPE I 1590 SERIES IMPORTANT NOTICE FOR USPS INSTALLERS USPS PERSONNEL MUST HAVE A McGARD SCREW DRIVER (USPS - MAIL EQUIPMENT SHOP PART NUMBER 110050) TO INSTALL AND SERVICE THE PARCEL DOOR ARROW LOCK COVER ON THE FLORENCE OPL. IF THE McGARD SCREW DRIVER MES NO. 110050 NEEDS TO BE ORDERED IT MAY BE ORDERED BY FAXING AN “OFF CATALOG” eBUY REQUEST TO: USPS MAIL EQUIPMENT SHOP FAX NO.
SITE PREPARATION AND PEDESTAL INSTALLATION METAL OPL TYPE I 1590 SERIES 4 93421_OPL_INSTALL www.florencemailboxes.
SITE PREPARATION AND PEDESTAL INSTALLATION METAL OPL TYPE I 1590 SERIES 93421_OPL_INSTALL www.florencemailboxes.
INSTALLATION OF MASTER LOAD ARROW LOCK METAL OPL TYPE I 1590 SERIES TO BE INSTALLED BY AUTHORIZED USPS PERSONNEL ONLY 1. 2. OPEN ARROW LOCK DOOR. 3. PLACE ARROW LOCK IN ONE (1) PH92300F ARROW LOCK SECURITY BRACKET AND POSITION ON DOOR. 4. REPLACE ONE (1) 86091 10-32 LOCK NUT IN THE REAR POSITION TO SECURE 92300 ARROW LOCK SECURITY BRACKET. 5. INSTALL 92303 LOCK SUPPORT PLATE AS SHOWN. 6. REMOVE FIVE (5) 86091 10-32 LOCK NUTS WITH 92303 LOCK SUPPORT PLATE (DISPOSE OF PLASTIC SHIPPING SPACER).
INSTALLATION OF MASTER LOAD ARROW LOCK 93421_OPL_INSTALL www.florencemailboxes.
PARCEL ARROW LOCK INSTALLATION METAL OPL TYPE I 1590 SERIES TO BE INSTALLED BY AUTHORIZED USPS PERSONNEL ONLY 1. OPEN PARCEL DOOR AND LOCK PARCEL DOOR CUSTOMER LOCK. 2. POSITION 64042-SS PARCEL DOOR LOCK STIFFENER ON THE PARCEL DOOR BOLTS AS ORIENTED IN ILLUSTRATION. 3. 4. NOTE: PARCEL DOOR CUSTOMER LOCK MUST BE IN THE LOCKED POSITION FOR KEY TO BE REMOVED. INSTALL ARROW LOCK AS SHOWN, SECURING WITH FOUR (4) 86455 10-32 THIN LOCK NUTS.
PARCEL ARROW LOCK INSTALLATION 93421_OPL_INSTALL www.florencemailboxes.
PEDESTAL TO OPL INSTALLATION METAL OPL TYPE I 1590 SERIES WARNING: UNIT IS TOP-HEAVY. PEDESTAL SHOULD BE MOUNTED TO PAD BEFORE INSTALLING CABINET. 1. 2. 3. 4. 5. 6. OPEN MASTER LOADING DOOR. REMOVE 91079 FLOATING SHELF, EXPOSING MOUNTING HOLES. PLACE UNIT ON ONE (1) 91121 PEDESTAL. FROM UNDERNEATH UNIT, INSERT FOUR (4) 86101 3/8-16 X 1.25 CARRIAGE BOLTS UPWARD. FROM INSIDE PARCEL COMPARTMENTS, ADD FOUR (4) 86097 3/8” X .688 OD LOCK WASHER AND TIGHTEN FOUR (4) 86089B 3/8-16 HEX NUTS.
PEDESTAL TO OPL INSTALLATION 93421_OPL_INSTALL www.florencemailboxes.
NUMBER PLACARD INSTALLATION METAL OPL TYPE I 1590 SERIES TO ALLOW FOR ALTERNATE NUMBERING WE SHIP THE NUMBER PLACARDS LOOSE (FOR UNITS THAT ARE NOT ENGRAVED). IF YOU DESIRE TO USE PLACARDS OTHER THAN PROVIDED ‘1P’ AND / OR ‘2P’, YOU CAN ORDER DIFFERENT NUMBERS FROM YOUR LOCAL AUTHORIZED FLORENCE DEALER. THE OPTIONS RANGE FROM ‘1P’ TO ‘99P’. 1. REMOVE ADHESIVE COVER ON BACK OF PLACARD AND PLACE APPROPRIATE NUMBER PLACARD IN DOOR EMBOSS.
NUMBER PLACARD INSTALLATION 93421_OPL_INSTALL www.florencemailboxes.
